Not my news

I have exciting news - but it is not mine!

My two best-est friends are both pregnant.  They are only 1.5 weeks apart which means that I will be a Aunty first in July and then again in August!

I am so very excited, so I took some time out from building jobs to do some browsing on the Internet for baby patterns. 

I have a beautiful pile of fabric that was brought for baby clothes and blankets.  Most of it is girly and pretty floral fabric so I hope that one of them has a girl for me, but I have boy (and unisex) things too!

Look at all the beautiful things I found:

From Shwin&Shwin, these girls are seriously tallented!
A Romper Pattern

A pair of Shoes: 

Dress and Shoes: 

And this Mini Maxwell is just too cute for words, however I think it might be a bit complex for me...

   

From Ellie's Wardrobe I found a pattern for Pleated top with Raglan sleeves:   

   

From Sew By Night Design I found this Summer Romper tutorial:

                     

And this cute cute dress and pants combo:

          

From Me Sew Crazy - words fail me at how cute this kid is! And this women has some seriously great stuff on her blog and lots of tutorials.

         

And last but not least Small Dream Factory does a great pattern on a Baby Sleeping sack, she uses great fabric!

   

With only six months to go I will be doing lots of sewing - I can't wait!

Dr Seuss Pram Blankets

It seems like everyone I know has just had a baby, is just about to have a baby, or just found out they are having a baby!

As such with so many baby presents on the horizon I thought I better spend some of my holiday sewing.

A few months ago I ordered some Dr Seuss fabric online from America.  It is possible to get it here but it is much more expensive and we don't seem to have half the choice.

I decided to make a Pram Blanket as I personally think that is important to give practical presents!

The size of the blanket was partly dictated by how much Dr Seuss fabric width I had to play with and partly the average size of a pram. I brought some standard Polar Fleece fabric for the back for warmth and because it comes in such great colours!

The blanket size I wanted to end up with was approx 45cm wide and 60cm long so allowing a few center-meters for seems I cut out my fabric and laid the two finished sides together. I put a few pins in it to make sure it didn't move during sewing, then sewed only three sides (make them the 2 long sides and one short - it makes life easier).  

You will note in this photo that my Yellow Polar Fleece is much larger than my Dr Seuss fabric; this is just because I had more of it, you can trim it all down before or after your sew it together but I generally don't worry about it too much.       

Once the sides are placed together I simply sewed around the outside edge of the smallest piece of fabric. Then cut off each of the corners diagonally so that when turned inside out, the corners sit better. Then it should look like this: 

Because I wanted the quilted look I added some welting (at least I think it's called welting?).

Then turn the whole thing inside out and makes sure to push out the corners.   

Then I pinned around the edges, it takes awhile but it is better to do it properly as you get a better finished edge.

The edge that I didn't sew in the first step I needed to tuck both edges into each other and put in lots of pins to hold it. 

Once I had done all that pinning I sewed around all the edges.

And it should look like this around the edges.

I then sewed two lines up the middle - thus...

And since I was on a role I made a few more.

How to make a Ham Bag

A Ham Bag is a tradition in my family, we always had a Ham Bag at Christmas and when I moved out of home, my mum made me a Ham Bag for Christmas! As such I was shocked to hear that my lovely friend Chloe not only didn't have one, but hadn't even heard of one! 

As they are very easy to make, and I knew she was hosting a big Christmas lunch this year, I thought that it would make a great Christmas gift for her and her family. 

So this is my tutorial on: How to make a Christmas Ham Bag

So to start with you need a piece of calico - any natural fibre material will work, but it has to be natural so it can breath.  To make life easy I just brought a strip of calico 55cm wide, straight off the roll at Spotlight.  By the time you do the hems and joins this is the perfect size; it may look big at this stage but remember there is going to be a rather large ham in it soon! 

So first thing to do is to hem your two short edges - this will be the the opening of the bag.  I always do a double hem (roll the hem twice) as this looks so much neater. Just put your sewing machine on a straight stitch and away you go - two straight lines. 

Once you have completed that very simple task you get be be a bit creative!  You can have any design that you want on the front of your bag - the sky is the limit here!  I chose to do some Christmas tree decorations, so I grabbed a scrap of Christmas fabric I had leftover from a kids project I had done:  

Flipping the fabric over I drew my desired pattern on the back of the fabric, and cut it out. 

After you have cut out your design you need to place it on the bag fabric in the position that you want it to be.  Remember that the bag will be tied up the top so anything you put up there will be hidden so place the design further towards the bottom of the bag for maximum effect. 

After you have decided where the design is going pin it to the front side of the fabric.  Remember not to pin to the backside too or you are never going to get that ham in! 

You now need to change your sewing machine setting to a zigzag stitch that is really tight - I put mine on a 0.7 width, you need to have the stitches close so you don't have raw fabric edges sticking out, and you finish the edge.  

Then very very slowly, just go around your shape until you have gone all the way around.  The tight turns are tricky but don't get too caught up with them, just keep going slowly and it is simple.  

After you have done the first one like this the rest are a breeze.  If you are doing the same design as me when you are done, it should look something like this: 

Now that you have done the front you need to flip over to the back of the bag and add a tie.  

This you do simply by getting the rough middle of the bag and sewing a piece of ribbon or cord close to the top.  Again remember to only go though one piece of fabric! 

Once you have done that you are up to the part where you join the sides of the bag together.  

Flipping the bag sides inside out so that the decorations and the ribbon tie are facing one another you need to sew down the sides of the bag to join them up.  If you are the lucky owner of an Overlocker this is the time to break that baby out! If sadly, you are like me, and not the lucky owner of an Overlocker, you will need to zigzag stitch the edges to stop them from fraying. 

  

And you now have a Ham Bag.  

You can absolutely stop here if you want to, there is no need to do anything further...... however me being me , I needed to add a little bit of embellishment to it - it just didn't look finished!  

So to finish off I made some little bows out of Christmas ribbon and hand stitched them to the top of each of the decorations.  This is best done with a needle and thread anything else is too much effort! 

And now Chloe has a Ham Bag for her family to enjoy! 

Happy Christmas everyone! 

Living room curtains

For the past two weeks I have been working away at finally (after two years in this house!) getting some curtains up. 

It shouldn't have (and it hasn't really) taken me 2 weeks, but in those 2 weeks there were a lot of other things going on, and I am really really good procrastinator!   

However last week I finally got sick of seeing fabric draped over things and finished that last little bit of sewing.  While I was doing that, the wonderful J put up the (apparently according to the instructions - simple!) quite complex curtain rail system.  

Our two forces combined we managed to finally get them hung. Then we sat back to admire our handy-work: 

At the same time as buying this fabric I brought the fabric for the curtains and padded bedhead for our bedroom.  They are the next two projects on my list.  

I can imagine that I will make full use of my procrastinating skills with those projects as well, so will not make any promises about time frames - but rest assured - I am on it! 

Pinwheel pillow tutorial

Project 2: The dress pillows.

So that I had some idea of what type of thing that Libby wanted in her room C and I took her to Spotlight to look as some fabric.  Not having a huge amount of experience shopping with 4 year olds I didn’t really know what I was in for...... it was interesting!

We confined Libby to just three fabrics that we would take home and make into pillows:

 

The floral and the stripe fabrics l loved, the ballet slipper fabric - I really couldn’t do anything with that! So I decided to take the inspiration from the ballet slippers fabric on and build on the theme rather than use the fabric itself!

The first pillow is the pinwheel pillow using the floral and stripe fabric. 

 As I was making this I thought that it would be good to do a mini tutorial on how you do one of these as they look complex but are actually so easy.  So this is how I did it:

1. Using a bit of junk mail I cut out a triangle shape.  

2. I then cut out four triangles of the floral fabric and four of the strips. 

3. Then laying down alternate floral and stripe fabrics I sewed one of each to each other making pairs.

4. Then I sewed the other unsewn edges to each of the other pairs...... That may not sound simple but basically I sewed all the triangles together to make a rough circle.

You may have issues with all the points in the middle meeting...... I decided to go the easy way and gather all the ends up and tied them together (then sewed to secure) – this makes a little gather in the middle which I think looks nice so I was happy with that.  I am sure there are purists out there who would do it the right way but I was happy with this way.

5. Then using another plain fabric I made the back of the pillow.  To do this I cut out two half circles.  To get the overlap (and hence the flap that keeps the pillow in – no zips here!) you need to cut one half circle more like a ¾ circle than a half.

6. I wanted there to be some element of the floral fabric on the back of the pillow to link in with the front and to finish the look. So I pinned together (insideout) the smaller of the back flaps and the pinwheel front.....

7. And on the other large flap I sewed some of the floral fabric to make a visible edge before pinning this underneath the smaller flap (so it comes out on top).

8.  After you have done this part your put the pinwheel front and the back together (inside out) and sew around the outside. The only thing you must remember is when you sew the back flaps to the pinwheel front you must make sure that the floral edge is underneath and then on the visible side when you turn it in the right way or your lovely floral edge will be on the inside of the pillow!

I then finished the inside edges inside with some zigzag stich and a tidy up with the sissors.......

And we were done.

The Ballet Slippers Pillow .... no tutorial but a very easy pillow to make!